2003 Toyota Corolla "low side" Questions

Ad

...side of connector to both hi and low beams. sidebar- I have seen both low beam elements burn out together, but if you have replaced both bulbs not the issue, if not give it a shot, stranger things ...

Ad

...side. On low beam, aim the hotspot of the driver's side light to the center of the lane, 25 feet out. Aim the passenger side light to hit the side line, also 25 feet out. The high beams will be ...

Ad

...low (small) pressure side-you CAN fill a system on the HP side, engine off, by hooking up to the HP side and inverting the can so that liquid 134a fills the high side-but it is not recommended if you ...

...side low beam not working. High beam works Is the filament inside the bulb broken? If so, the low beam is burned out. Try swapping with the left bulb (assuming it works ok) and see if the right side ...

...low side port, on the passenger side just in front of the firewall. Frank Frank's Friendly Cars Maui Car Rental www.MauiCarRental.biz Look on the Pass Side under the Hood on the Bigger of the two a/c ...

Question about Toyota Corolla

1 Answer

...low intensity). When brake is applied, the right side brake light remains the same intensity. Meanwhile left side brake light behaves normally-dim head light on, left brake light low intense on; when ...

Always charge with can in upright position through the low side line into the compressor. find the a/c compressor and follow the larger line from it to the fire wall and you will find it between there

and obtained 30 psi low side and 250psi hi side. A/C blows relatively cold. Any ideas why my compressor cycles on and off so often? Could be low on freon. Or the cycling switch is bad. Hope this helps

...side low beam stopped working last week.Had both bulbs replaced at Toyota Dealer.Today driver side low beam does not work, and neither high beam bulb works when stalk is in the normal (fully down) ...

Question about Toyota Corolla

1 Answer

low side would show something around 30 or 40 psi and the high side would be over 200 psi.  One port is bigger than the other, but some cars have a fill port on the high side for factory use only

Not finding what you are looking for?
2003 Toyota Corolla Logo

1,816 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1998 Toyota Corolla
1998 Toyota Corolla

1,231 Questions

2005 Toyota Corolla
2005 Toyota Corolla

1,236 Questions

1994 Toyota Corolla
1994 Toyota Corolla

819 Questions

1996 Toyota Corolla
1996 Toyota Corolla

767 Questions

2006 Toyota Corolla
2006 Toyota Corolla

792 Questions

Top Toyota Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...