it wouldn't shift into 4 wheel drive. I replaced the actuator and still will not shift into 4x4. What would be the problem? you could have problems in the shift control module.or faulty switch in dash
wheel drine willnot work front end making noise Fuse is located at the end of eh dash on drivers side and the Actuator is located at the front differential and on the passenger side. When in 4wd mode,
...no recall, just bend over and take it. my four wheel drive lights are not on,that are the left side of my dash and service fwd light is on,but everything else works fine.other than my fwd will not ...
Question about Cars & Trucks
...drive line will not free wheel in 2wd either !! What could be my problem , been trying to figure out for 3 months now help help help please if trans changed out and no movement and front is not ...
replace front cv shafts on a 1997 isuzu rodeo ? Remove tire, remove axle nut, pop ball joint off, remove clip, pull axle For a more detailed instructions, go to autozone.com and register for free. Now
...replace, take the module out for diagnosis. This module signals the front axle to lock the vacuum actuator and commands the transfer case to shift torque split and gear reductions for 4lo.SOMETIMES, ...
Question about Cars & Trucks
Have a 99 yukon and the actuator has been replaced but it still wont go into four wheel drive Wiring or connection issue .
533 questions posted
Usually answered in minutes!
352 Questions
394 Questions
295 Questions
304 Questions
277 Questions