1997 Toyota Tacoma "cylinder" Questions

...sounds fine when started and then when you put in gear it start misfiring P0300 - Random / Multiple Cylinder Misfire Detected Possible Causes: - Improper spark plug - Insufficient compression - ...

how to change a clutch master cylinder on a 2006 toyota tacoma need help on how to change clutch master cylinder remove line from the side of clutch master cylinder two bolts or nuts on firewall ...

...to remove Sounds like a couple waffers have broken inside and 1 of them is stuck preventing the cylinder from turning. The waffer is above the shear line. You will need to remove the bottom cover ...

where is the number 4 cylinder on a 2002 toyota 3.4 liter Cylinders are numbered 1,3,5 on the left and 2,4,6, on the right, front to rear. And the firing order is 123456, hope this helps. middle ...

Which bank is #6 Unless you are talking about an INLINE 6-cylinder engine, or a 12-cylinder V-TYPE engine, cylinder 6 is on bank 2.

tacoma 2001 strong engine shaking Dead cylinder...do a compression test on each cylinder and write the numbers down for each one, you will probably find at least one of them with a zero reading. Then ...

2002 toyota tacoma reading code 300 random misfires, took it to a mechanic he says cylinder #1 is low on compression and i need a new motor Well, I would probably get a second opinion next. A random ...

how do i adjust my cluth on a 2003 tacoma The slave cylinder in these trucks makes the clutch non adjustable. If you have a soft clutch pedal which goes to the floor and can not shift as easy as it ...

Is all this caused by a bad slave cylinder on a 99 tacoma ? I now have a similar problem. After using some WD on the inside and outside of the slave cylinder and a hammer, I got the pedal to go down ...

#4 cylinder is misfiring in my 1997 toyota tacoma 4x4. Auto parts store put on machine and got this result. They say that it could be spark plug. Any Ideas. Looses power on mountain. Possible causes ...