1996 Toyota Tacoma "4 fuel pressure regulator" Questions

fuel pressure is 38 to 44 PSI Thanks for choosing FixYa for assistance. A "FixYa" rating (4 blue diamonds) would be greatly appreciated. Thnaks in advance, and please feel free to re-contact me if you

fuel pressure is 38 to 44 PSI Thanks for choosing FixYa for assistance. A "FixYa" rating (4 blue diamonds) would be greatly appreciated. Thanks in advance, and please feel free to re-contact me if you

...4 tank of Gas.  New Fuel Pump Relay/Computer Relay (under the hood).  Also replaced EFI Fuse in (Fuse Box Inside Truck).  No line pressuring up at the start switch.  It usually ...

...4. The rear crank position sensor, 5. the control module under the coil packs, and 6. the fuel filter. So far it seems to run a little better when I unplug the EGR valve but that is only temporary. I ...

...fuel Regulators on 4.8L, 5.3L & 6.0L EngineTo Remove: CAUTION Three styles of fuel pressure regulators and fuel rails will be used in this model year. Each regulator has a different "footprint" ...

...4) Fig. The fuel pump/fuel sender module assembly is mounted in the fuel tank 2.- Fuel Pressure Regulator - REMOVAL & INSTALLATION (the fuel pressure regulator, which is located on the fuel rail ...

...4) remove fuel pressure regulator retaining screw (retain for re-use (5) using a shop towel to catch spilled fuel, lift & twist Fuel pressure regulator to remove it from the fuel rail. (6) ...

...fuel injection pump. (4) Oil leak at high-pressure fuel pipes. (5) Wear of fuel injector nozzles. Too low fuel injection pressure. (1) Lose pressure regulating screw. (2) Deformation or break of the ...

...4, 5 and 6)Relieve fuel system pressure. Disconnect the negative battery cable. Clean dirt and grease from the regulator retaining ring. If equipped with a bolt on-type pressure regulator, remove the ...

...OR MORE Here's a link to a new one. ...