1996 Toyota Corolla "cam cap torque" Questions

after the cam bolt torque settings for a 1992 toyota corolla 1.6 AE 90 CSI cam caps 8nm ,cam gear bolt --use a locktite product and tighten tight

...cam timing, ign timing, they are all ok. Have a new distribruter cap, rotar, leads and plugs. goes well at high revs but no power down low The 4AGE does not start making good power until you get to ...

what would the torque setting for a 86 corolla head bolts and cam bolts thank you Jason 4a-c and 4a-ge is 108lbs. for camshaft bearing caps bolts. cylinder head bolts:4a-c =43 4a-ge =44.

...cap and rotor missed gapped spark plugs to spec, not 0.045 " out of box? air filter and fuel filter are way before any pump , right? my guess is the 4AFE engine , right? next is cam belt, if slipped, ...

...cam engine. And then if it is a V6 or V8 then both head gaskets must be replaced even if only one blew. And last but not least, you have to find out if there is other engine damage and what caused it ...

...torque settings for the cam caps and thermostat housing bolts on a Hyundai Getz 1.4 16 valve G4EE engine are: Cam caps: First step: 2.8-3.4 lb-ft or 4-5 Nm Second step: 11-13 lb-ft or 15-18 Nm Final ...

cam bearing cap torque. The 6VE1W 3.5L DOHC 24V V6 was introduced in 1998 with 215 hp (160 kW) and used until 2004 with the termination of the Isuzu Axiom. Gasoline direct injection was added for 2004

torque settings for cylinder head - cam caps - inlet manifold, exhaust manifold and cam pulley - please help !! Head bolts are torqued in 3 steps, 1-18ft.lbs, 2-60 degrees, 3-60 degrees, camshaft caps

cam start with first cap on left being #1 then bolt on other side of cap as #2. Cap behind would be #3 to left then #4 bolt next to it. Keep tightening the next 2 caps behind them in same manner, then

cap bolts 95-105 ft-lbs Connecting rod bolts 40-45 ft-lbs. Cylinder head bolts 90-100 ft-lbs. Rocker arms 17-23 ft-lbs. Intake manifold bolts 23-25 ft-lbs. Oil pump bolts 23-28 ft-lbs. Cam bolts 40-45