1996 Toyota Corolla "axle nut torque" Questions

what is the torque specs for the axle nut ? 159 ft lbs for the center axle nut for front.

...nut that holds the axle into the splined end inside the transaxle. This nut is usually torqued into place very well though, but if it is loose or was not torqued properly then this could cause ...

...Make sure to replace any cotter key removed with new ones during install. Torque specs you need are Ball Joint to Spindle = 91 ftlbs Tie rod to spindle = 36 ftlbs Drive axle hub nut = 166 ...

axle nut, it pulls the axle shaft out of the trans. Any ideas? If you bought new drive axles, they may not have given you the right ones (too short) - they did this to me with my 93 Subi - (I own a 93

...on both sides. It does not make the noise when turning. I am stumped!!! Ensure the wheel nuts and Axle nuts are properly torqued to the specification. Lift up the front wheels, place supports under ...

...axle nut 103 ft lbs BHA53914 Axle / Spindle Nut Torque Specification - 1A Auto https://docs.1aauto.com > BHA53914 Torque Spec PDF GMC. Envoy XL. 2002-06. Front. 103. 140. GMC. Envoy XUV. 2004-05. ...

...axle nut on it, please and thank you. 160 ft lbs 2007 Yaris axle nut torque pdf" the torque is 160 ft pounds for the axle nut. Last edited by GrayYaris; 04-23-2014 at 08:39 AM.Apr 22, 2014 Torque ...

...axle nut torque spec 2004 chevy silverado 2500HD? Torque specs front axles nut Here are the front axle nut torque specs for the 2004 Chevy Silverado 2500HD: • Axle Shaft nut - 177 ft-lb • hub and ...

...AXLE NUT.USE 6 POINT SOCKET.DONT USE 12 POINT SOCKET.COULD DAMAGE AXLE BOLT EDGES.MAKING IT HARD TO GET OFF.YOU NEED A TORQUE WRENCH WITH THE RANGE OF 200 FT LBS TORQUE.YOU NEED 1/2 BREAK BAR.AND A ...

...AXLE NUT AND THE BRAKE CALIPER BOLTS CANT REUSE THEM.FRONT AXLE NUT ON VERY TIGHT TO GET IT OFF LEAVE TIRE ON LOWER VECHICLE DOWN SO THE VECHICLE WEIGHT WILL HOLD THE WHEEL WHILE YOU LOOSEN AXLE ...