...REMOVE AIRBAG FUSE OR DISCONNECT NEGATIVE BATTERY CABLE TO DISCHARGE AIRBAG CAPACITOR DISCHARGE BEFORE YOU REPLACE IGNITION SWITCH KEYLOCK CYLINDER. CHECK MAKE SURE YOU INSTALLED ...
...ignition coil and bracket assembly from the engine. Remove the accessory drive belt(s). Unbolt and set aside the power steering pump and bracket. Do not disconnect the hoses. Remove the intake and ...
...ignition coil, as soon as the engine starts to turn over there should be voltage. If not, the crank sensor is not triggering the ECM quickly.... on 98-99 wranglers, this was a problem area. Check ...
ignition switch or the headlamps are on with the driver?s door open. The VTSS will not arm if either front door or the liftgate are locked using the key in the lock cylinder. Active arming of the VTSS
2,444 questions posted
Usually answered in minutes!
1,828 Questions
1,565 Questions
1,303 Questions
1,134 Questions
1,141 Questions
