1993 Toyota Previa "replace cable open hood" Questions

...Open and support the hood. Disconnect the negative battery cable and wait at least 90 seconds to proceed working on the vehicle. Disconnect the power steering and coolant reservoirs. Disconnect the ...

...open The cable to the hood is most likely broken. The hood can be opened from underneath by pulling the cable and replacement is not terribly difficult once the hood is open. Some how your cable got ...

...replace this cable? Thanks if it broke with hood open its not going to be hard to replace it.first you go to auto parts place or dealership buy the cable feed it through the floor board to the hood ...

...replace cable first, try smacking the hood at one of the front corners while someone else pulls the release handle. or even after you've pulled on it. if that works, once open, adjust and lubricate ...

replace the cable. the further you can reach up under the panel the better your chances of getting past the broken part of the cable and avoid removing the grill. you might also be able to gain access

...replace cable     or you can use a wire hanger  at the front of the truck above the ford badge   the hoodlatch is there   fish around under the switch ...

...SE has broken hood latch cable. How do I get the hood open to replace the cable? Here's a video Dan Hooper suggested as a solution to your problem from YouTube:Opening Hood with Broken Release ...

replace the cable. the further you can reach up under the panel the better your chances of getting past the broken part of the cable and avoid removing the grill. you might also be able to gain access

...the cable from the release latch in the footwell, then use a pair of pliers to pull the cable and open the hood. You might even have to strip the cable covering back a little to get to the

replace the cable. the further you can reach up under the panel the better your chances of getting past the broken part of the cable and avoid removing the grill. you might also be able to gain access