1993 Toyota Previa "check crank pulley" Questions

Ad

...the reason check your crank pulley,possible the rubber which is used on it cracked and on loading the ac knocks,or check the tensioner  of the ac belt,or the ac compressor the pulley of

Ad

...when you remove the crank. Check the crank pulley very closely after you pull it off. they are noted for the rubber insulator breaking and then you have to replace the pulley too. Hope This

Ad

Question about Toyota Previa

1 Answer

...crank sensor... I'll check... I found this from a guy on another website..."It does however have a crank sensor and if you look at the lower crank pulley just to the back of the pulley and go around ...

Question about Toyota Previa

1 Answer

...crank pulley and replaced it with the new one in the same position, now the car will not start...any ideas as to why? you dont really need to mark your pulley. You need to set your crank pulley to 0 ...

...any idea why? Thanks SeanL possible that the key in the crankshaft has come out and not allowing the pulley to go on properly check that you haven't jammed the pulley onto the crank position ...

...crank pulley or the wrong pulley was installed or installed incorrect, you will need to remove the belt and check the alignment of the pulleys, check the tensioner also. most times a bad tensioner ...

...of the harmonic balancer on the crank shaft. check the crank pulley nut is tight and the pulley is not moving on the crank shaft. Check for worn timing chains or out of adjustment chain

Question about Toyota Previa

2 Answers

...Check under the hood or on the radiator support. 89 olds cutlas ceria, 2.5 cyl with ac...... start at crank pulley rib side around p/s pulley to alt pulley flat side on the left side of water pump ...

...Crank pulley does not have any play whatsoever when checked. So I am wondering if that will solve my problem or is there anything else that would be causing a miss alignment? The tensioner pulley is ...

to TDC. where should the arrow point on the cam pulley? Check with manufacture, yet sometime it point to the crank pulley or maybe to a point on the block. Best to note location before it gets removed

Not finding what you are looking for?
1993 Toyota Previa Logo

336 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Toyota Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...