1992 Toyota Xtracab "replacing break light switch" Questions

Ad

...break lights not working , is there a fuse for this or is it hard wired bulbs ,work fine , ? There is a fuse for the brake lights. Check fuse and replace if blown. If the fuse is not blown, check the ...

Ad

Question about Toyota Xtracab

3 Answers

...replacing the break light switch make sure that the tab on the oposite side is locked into the bracket to left left of the break pedal or the body of the switch will move when adjusting. once ...

Ad

...break light went out I replaced that light bulb. After replacing the light the breaks lights worked for maybe 2 break pumpbs and now none of them work. I replaced the two main bulbs and checked the ...

...break light switch which on my car is on the break tank. There should be 2 wires going to the switch. If you short them out and the lights work then replace break light switch.It might be the earth ...

break light switch in 2008 gmc sierra 1500 k i replaced break light switch and now break lights stay on but dont work properly You have not set the switch correctly, at rest the switch is operated and

...break light switch on 1997 chevy cavalier how do i take out break light switch & replace break light switch on 1997 chevy cavalier the switch is connect to the back of the brake pedal. DON"T PUSH THE ...

Question about Toyota Xtracab

1 Answer

...break switch under the dash connected to the break itself once you press the break the switch trips and the lights go on it sounds like that switch is gone you need to replace hope this helps you out ...

Question about Toyota Xtracab

1 Answer

...break light switch, This switch is located above the break pedal. When you step on the break it pushed down onto this switch. If the switch has fallen out of place or has gone bad you will need to ...

Question about Toyota Xtracab

1 Answer

light on my 98 villager break lights won't go off somethimes, so I try to replace Breake light switch , now the breake light does not work at all. I did check fuse it is good. bulbs and good too . the

Question about Toyota Xtracab

2 Answers

light switch. You'll have to replace the plunger switch located at or on the brake pedal arm under the dash. its probily your break lights ON YOUR BREAK PEDAL UNDER THE DASH WHEN YOU SHUT YOUR CAR

Not finding what you are looking for?
1992 Toyota Xtracab Logo

8 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Toyota Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...