3.Using crankshaft pulley bolt, rotate crankshaft so timing mark on crankshaft sprocket aligns with timing mark on oil pump housing. See. This will position keyway in crankshaft sprocket at 12 o'clock
3.Using crankshaft pulley bolt, rotate crankshaft so timing mark on crankshaft sprocket aligns with timing mark on oil pump housing. See. This will position keyway in crankshaft sprocket at 12 o'clock
Question about Toyota Camry
...Engine Rotation Direction (3) Cylinder Head Side 1. Install timing belt. 1. Align the mark (notch) of crankshaft timing pulley (2) with mark on oil pump (1). Align the mark (groove) on the crankshaft ...
...Engine (see Figures 1, 2, 3 and 4) Disconnect the negative battery cable. Remove the timing belt covers. Rotate the crankshaft and align the timing marks located on the camshaft pulleys and the seal ...
3: Camshaft alignment using the special service tool Fig. 4: Insert the crankshaft damper bolt to turn the crankshaft and . . . Fig. 5: . . . align the camshafts and the . . . Fig. 6: . . . crankshaft
...3) engines To install: NOTE Always replace the timing belt after loosening or removing it. Install the timing belt. Engage the timing belt tensioner tab into the timing cover back plate. Adjust the ...
Question about Toyota Camry
...Snap On Tools, Mac Tools, or Matco Tools dealers to rent one. See the link below for photos of properly aligned timing marks for your engine. 1994 BMW M42 timing chain alignment marks Google ...
...engine NOTE: A 3⁄8 inch drive, 10mm, 2 inch torque adapter offset is required to tighten the tensioner bolt. Using a 6mm Allen wrench, adjust the tensioner until the index marks are aligned ...
Question about Toyota Camry
3/5 no compression on 2/4/6 timing marks are lined up. You have 2/4/6 timing marks 180 degress out on exhaust or intake cam . Did your special tool ? Rotate the crankshaft using the J 42098 until the
engine is correctly timed, the timing marks will NOT perfectly align. Figure 2. Figure 3. RH Bank Exhaust Camshaft Timing Gear 1 2 1 Bearing Cap Timing Mark 2 Gear Timing Mark Figure 4. RH Bank Intake
1,389 questions posted
Usually answered in minutes!
1,828 Questions
1,753 Questions
1,565 Questions
1,303 Questions
1,134 Questions