ignition switch lock cylinder to the ON position. What do i do? well is it that the key wont turn or dont have key? you can drill out the lock use a big bit it will distroy the tumblers so you can use
Question about Toyota Cressida
...ignition lock on my 1998 Mazda Protege? Tumblers are stuck. Key won't go past accessory. Had a friend disconnect it so I can start the car with a small screwdriver. So, I can get to the ignition ...
Question about Dodge Cars & Trucks
...key Replacing the ignition lock cylinder on a 1998 Dodge Intrepid without a key can be a bit tricky, but it is possible. Here are the general steps you can take to replace the ignition lock cylinder: ...
...ignition key cylinder body. To remove the ignition switch, first remove the ignition lock cylinder. 1993?99 Golf and Jetta Disconnect the negative battery cable. Center the steering wheel. Remove the ...
...key it will not turn so the steering stays locked and it will not come out of park? You will most likely need to replace the ignition lock cylinder. Functional Lock Cylinder Disconnect the negative ...
How do I get the ignition lock cylinder out? have you tried turnin the key to the run pos. then try to pull it out! pull the positive off the battery first and if this dont work what is year and make
ignition key cylinder. Key will not turn,stuck in the lock position,got it to turn once then now will not.worn key,key hole is loose.Want to replace ignition cylinder however cannot see were there are
Question about Toyota Cressida
...ignition key and the locksmith couldn't do anything why don't you bring the title to your local dodge dealer and have them make a key? As Jeremy W suggested, the best and cheapest option is to take ...
Question about Toyota Cressida
IGNITION LOCK CYLINDER IN A 1998 ACURA RL THE KEY IS IN THE CYLINDER AND TURNS TO ALL POSITIONS. You have to replace the assembly if you can't pull the end of the key out. That is done by removing the
Question about Toyota Cressida
key to start truck or go into acc postion to remove Sounds like a couple waffers have broken inside and 1 of them is stuck preventing the cylinder from turning. The waffer is above the shear line. You
81 questions posted
Usually answered in minutes!
77 Questions
78 Questions
38 Questions
8 Questions
1 Questions