2004 Toyota Corolla "2010 drive cycles" Questions

2010 corolla drive cycle drive cycle, why not just forget that. I do. (mostly) why>? what do I do, i reset the PCM with my $10 scan tool when dont, all monitors are now reset, ALL ! drive cycles to

...2010 carolla, and I fail emmission test, I have driven for over 200 miles and I am stilling failing. My check engine lights in not on. I took my car to get check out, and I was told that all system ...

...cycles. Well it's 200 miles later and I am following up on the March 16, 2010 request. What else should be done - I still have the same diagnostic code of - P0741. P0741 deals with internal ...

2010 kia sportage has clicking noise when the air is turned on. Doesn't happen when the heat is on and it only does it sometimes. Notice it at stop lights after about 20 minutes of driving. I ha ...

2010-04-01_145212_ggggggggggg.gifthis is the location it should be in. you take the screws out un plug it put the new one on and your done. the check engine light will not turn off until you

...2010 , and if i connect my ipod in my stereo the stereo turn off and on and i cant move the buttons i need reset the stereo somebody can help me ? Most modern OEM stereos require coding changed to ...

Why the idling becomes unstable/erratic when I change only the batterry? After a relearn drive cycle the idling should return to normal. How much have you driven it since the battery replacement ?

...2010 Ford Fusion If the check fuel fill inlet lamp or CHECK FUEL FILL INLET message comes on, the fuel fill inlet may not have properly closed. The inlet may have stuck open or debris may be ...

...approx 7 drive cycles for everything to smothen out. drive it for about 1 week and it might correct itself. with regard to the check engine light you might have forgotten to plug a wire to a

...2010 equinox there is no radiator cap Pull off an upper radiator hose and fill until it starts to come out. Connect the radiator hose and fill the overflow tank and gow for a short drive to heat ...