1989 Peugeot 405 "bleeding air waterpump" Questions

...waterpump at the same time, water pumps are only about £20 and wont add much to the bill if doing them at the same time. As there is no water coing out of the bleed niple then it must be air ...

...waterpump from the car and what other parts i need to remove and how? no special tools fairly easy job just make sure you bleed the air out of thr cooling system properly or you will quickly damage ...

Changed Waterpump and now car runs rough you have air in coolant system, its going to run rough untill the coolant can flow thru system completly. try bleeding air out

waterpump car still runs hot temp goes real high red light comes on what do i do Make sure to use OEM parts and drain the air out of the cooling system. The 3.5 especially is very touchy regarding OEM

air from cooling system. 2) Radiator blocked - solution - drain and flush radiator 3) Failed waterpump - solution - fit new waterpump 4) Engine thermostat stuck in closed position - solution - fit new

...car may have a blown head gasket if u waited to long befor changing the waterpump.coolant loss going out exhaust pipe. This could simply be air in your cooling system. Try bleeding out air

2002 xterra still overheats I replaced the thermostat and waterpump You need to bleed air out of cooling system

...the air, also might be one by the water pump. Its a common problem on them cars after you have drained the coolant to do thermostat or waterpump. Just bleed off the air and you should be good to

air or bleeding, because VW engines don't need bleeding and don't trap air.  You check the head gasket by running a pressure test.  Replace the reservoir cap with the pump and gauge,

97 Mercury Grand Marquis overheating,thermostat replaced, waterpump not leaking - Make sure that the cooling fans are working and the system is bleed completely from air pockets.