1996 Jeep Cherokee "number distributor accord" Questions

...number one tower of the distributor cap. When you install the distributor, line up the rotor with the mark on the distributor. Here is also a link with more information that should help you: ...

need firing order for 1993 Honda Accord SE. 1-3-4-2 Distributor rotation-clockwise, number 1 cylinder is on driver side, number 1 position on distributor looking down on it; is to the rear driver side

#1 position for distributor on a 1990 Honda Accord please The cylinder numbers are usually stamped on the distributor cap, of that year accord.

...1989 honda accord 4 cyl fi plugs to rotor 1 3 4 2 number one should be marked on the correct tower. It should should on distributor cap, but it is 4-2-1-3 top to bottom (flat side) of distributor

...Distributor: ......4 3..........2 ......1.......\\\\\\ ........\\\\\\\\\ Let me know if this helped. Thanks for using FixYa.com! The order starts when the #1 cylinder is at TDC in the compression ...

distributor in a 1991 honda accord lx and I need a diagram to go by to make sure it is being wired correctly Here is the firing order for a 1991 Honda Accord LX.Hope this helps. the engine should have

...engine in a 1996 Honda Accord is : 1 - 4 - 2 - 5 - 3 - 6 The distributor rotor turns COUNTER-CLOCKWISE The engine cylinders / spark plug locations are numbered : 1----2----3 4----5----6 front of ...

...the crank. If you actually have a distributor the number 1 is usually marked on the Cap top and you will want to set the rotor to point just a little before that point. Around the 1 o'clock

...number one spark plug wire on the distributor cap. If the rotor is pointing somewhere else you will need to pull the distributor and reinstall it to get things lined up. Then the engine should

...number 1 cylinder on the distributor cap 1994 honda accord ex From ZJ limited: "1.6L Engines Firing order: 1-3-4-2 Distributor rotation: Clockwise. " The # 1 cylinder is on the opposite end of the ...