1992 Jeep Cherokee Limited "output shaft front drive axle" Questions

...shaft (output shaft) (19). Important: Do not damage the case. Attach a slide hammer with adapter to the axle shaft (output shaft) and pull the axle shaft from the case. Remove the deflector (28). ...

...output shaft that drives the rear axle. The 2WD to 4WD HIGH shift is accomplished when the 2WD to 4WD HIGH shift fork moves the mode sleeve to engage the drive sprocket to the rear output shaft. The ...

...output shaft area of the transfer case, and the other, located at the front output shaft area of the transfer case, send front and rear propeller shaft rotation speed information to the TCSCM. When ...

...was bad, where the CV shaft bolts to the output axle shaft there should be almost no travel between wheel and differential if there is use a pry bat and hammer to fully seat axle into

the front output shaft, and the rear output shaft. The transfer case requires DEXRON®III ATF GM P/N 12378470 (Canadian P/N 10952622), which is red in color. This system does not have an encoder motor

Output Shaft slides into the carrier and has large teeth on the other end. The collar it has large teeth inside it that mate with the Output Shaft with the Fork. The collar rests on the axle, the fork

...output shaft area of the transfer case, and the other, located at the front output shaft area of the transfer case, send front and rear propeller shaft rotation speed information to the TCSCM. When ...

front and rear output shafts together. Part time a differential inside transfer case to divide drive between front and rear diffs. Full time 4x4 should never be used on hard surfaces, this can lead to

...you put my 2001 dodge Durango when you put itin 4 wheel drive..how do I fix this? nothing The c/v axle and output shaft on the front axle are worn where they spline together, they need to be ...

...Shaft is just a fancy term for drive axle with a built in universal joint. It transfers the drive force from the transmission output to the wheel. Reply as a comment to this post for more ...