1992 Lincoln Town Car "blaster power" Questions

power lock button while car is running locks doors but immediately they unlock. I have removed the interior lights fuse to stop lights from being on. the best lube to use for these latch assembleys is

...help... I keep several cans in my shop at all times!! righty tighty - LEFTY LOOSEIE.. Use a 1/2 inch drive power bar and a 6 POINT "impact socket" Blaster PB Penetrating Catalyst Penetrant Walmart ...

power tools and know there good and tight, Powerful tools don't care they'll just break the bolt but they vibrate and shake the bolt out. Blaster soaking is good hitting the bolt hard with a hammer is

...power lock works. and it opens up easily from the inside. i think a previous owner put an after market handle on the outside, if that matters. i have taken the door panel off the inside of the door ...

doors will not lock-could this be an elect problem well if it has power door locks yes the actiator could be bad that locks it if not you should get some pb blaster and pray back in there

...blaster let soak over night apply more in morning than work on moveing seat. if they are electric check fuse , check for power at motor if power exists replace motor if seat is manuel and you still ...

power windows will not work on drivers and passengers side I need some trouble shooting advice try cleaning the switches This can happen if car sits without being used for awhile. Take door panels off

...power lock actuator for that specific door? Yes, probably, but before you pull off the inner panel, check for broken wires in that rear door opening. You might luck out and find a broken wire for the ...

...power direct while , applying 12 volts. as soon as it starts to work apply pc blaster or crc to every thing that moves. use the same procedure for the drivers side. relay, fuse, switch, or regulator ...

...POWER STEERING PUMP. IS NOT PUMP check the idler pulley and tensioner I have seen this before coming from a idler pulley bearing on a Honda I sprayed some pb blaster/wd 40 on the center of the pulley ...