2 HEADLIGHT SWITCH BRACKET RETAINING SCREWS AND PULL THE BRACKET AND SWITCH FROM THE INSTRUMENT PANEL,REMOVE THE NUT RETAINING THE SWITCH TO THE BRACKET, DISCONNECT THE CONNECTOR AND REMOVE THE SWITCH
...Remove the instrument cluster finish panel bolts. Remove the instrument cluster finish panel bolts. Pull out and position aside the instrument cluster finish panel. Disconnect the electric clock ...
Question about Lincoln Town Car
...an internal fault in the instrument cluster since the other lights stay bright and you can control them. I suspect that you may need to remove the cluster and have it rebuilt to cure this ...
...to right they get dimmer to not on at all. Dimmer switch is fully functional. Fuses all ok. You probably have some bulbs burned out in the instrument cluster. Remove the cluster and check the
...Instrument lights are completely unresponsive. hi,seem lighting switch is grounded or wiring for cluster is grounded,if can remove the lighting switch disconnected the wire,see if light in cluster is ...
Question about Cars & Trucks
...instrument cluster C220b-8, circuit 53 (BK/LB), harness side. Do the interior lamps illuminate? Yes REMOVE the jumper wire. GO to A6 . No REPAIR the circuit. CLEAR the DTCs. REPEAT the self-test. A6 ...
Question about Lincoln Town Car
...light. Those days are far-off and mostly the instrument panel must be removed to provide access which isn't often a very easy task so once the panel is removed it is a good idea to replace all the ...
Question about Lincoln Town Car
dim on right side only.!dimmer switch/ bad bulb ? Bulbs. Remove the bezel (I'm sure it is screwed On, find them), remove the instrument panel(definitely screwed on), remove the plug. replace the bulbs
...remove the instrument cluster, and check the bulbs, and connections. (Bad bulbs, especially all of them at once, is rarely the case.) If the bulbs are good and the connections are clean and making a ...
...instrument cluster has a poor connection. If the dimmer switch does not reproduce the problem, you may attempt to remove the cluster, clean the contacts with electronics cleaner and a clean pencil ...
551 questions posted
Usually answered in minutes!
900 Questions
787 Questions
686 Questions
613 Questions
634 Questions