2004 Hyundai Santa Fe "replace expansion valve located" Questions

...replace the part. Filled it up immediately afterward and no more starting problems. Part is located directly behind the manifold - top, rear of the engine compartment - just between the engine It ...

...replace your expansion valve,had mine replace not long ago,had Midas do mine. Replacing An Expansion Valve In Your Car ,hERE'S A NEW PART. Expansion Valve at AutoZone com Best Expansion Valve Parts ...

...replace the expansion valve. The high pressure was way to 130-275 and the high side hose was very hot while the mechanic was charging the system and the low side was high at 130 and would not drop ...

...expansion valve on 2001 suburban. Blow warm rear. Hey Y'all, Trying to ask where the rear expansion valve is located on my 2001 Suburban. I was told it is where the blower motor condenser is. At the ...

replace ac expansion valve Where is expansion valve on 2006 saab 9-3 2.0 turbo located and what must be removed to get to this expansion valve? Do they commonly cause poor ac funtion for this vehicle?

...replace the expansion valve, you will need to discharge the AC system. Remove the two AC lines from the evaporator. Then you will need to remove the glove box Then you will need to unbolt the ...

...replace the expansion valve on my '95 Toyota Camry. Do I have to take the dash out to access the expansion valve? What will I need to remove to get the expansion valve out? The expansion valve is ...

...are typically on the ac compressor the expansion valve on your car is not located any where near the compressor it is under the dash in order to replace that valve you have to remove the evaporator ...

expansion valve is located under the dash on this car. the problem is how to access it to replace it. The compressor is working properly but the unit is not cooling. I've recovered the refrigerant and

Location of Expansion valve on 2001 Monte Carlo. Trying to find where it is so I can replace the AC system the expansion valve (TX valve) is located at the inlet pipe next to the evaporator