2004 Hyundai Santa Fe "focus cam replace" Questions

...focus 1.8 tdci has cam belts or chain as our 2004 focus is at the mileage where a cam belt would need to be changed. timing belts should be replace at 60,000 miles. ithe focus is a belt i have a 2005 ...

...focus twin cam timing i just replaced the head gasket on a 2000 ford focus and cant find aney timing marks to reinstall the belt corectley please helpme i need timing marks for ford focus 2000 16 ...

cam timing for ford focus 2004 duratec 1.6 duratec motor Are you needing the twin independent variable cam timing info or is this a cam replacement initial cam timing setting? the variable valve ...

...focus 2.0ltr duel overhead cams Where are the timming marks on the cam pulleys? there isnt marks!the cam pulleys have do nothing with timing!remove the valve cover and see in the other end of the ...

focus i can get the bottom end in time can get the over head cams in time you cannot just replace timing belt without special tools like OTC #6474, and camshaft alignment 303-465 timing peg.always put

...focus se 2.0L zetec (DOHC) engine. This is a very very easy timing belt setup. first off you have to remove the valve cover. Then you have to remove the serp belt. Then remove anything thats in your ...

...reliable car i suspect a very[ small problem], the milage is small for a focus.adrian Would this be the cam shaft position sensor? As I am having the same problem, also just replaced the idler ...

...focus 1.8 2003 petrol engine. I am not a novice, have some mechanical experience but have not worked on a newer ford. are any special tools required? About 8, if you are methodical you should be ok. ...

cam belt failure)and had the complete head done.After completion of the work,the car does not start(ford focus 1.8 tdci 2004) I took out the injectors and crancked the engine and no injection.There is

...cam, how to replace belt? 2.0 liter, single cam, how to replace belt? A proffessional can do this in about an hour and a half. It could take you a full day unless you know the basics, and some tricks ...