2003 Hyundai Santa Fe "plug wires" Questions

plug wires, and they actually connect to the spark plug which is down inside the cylinder. To remove, you will need a 3/8 drive ratchet, a long extension, I would say 6-12 inches, long enough, but not

...its pretty simple... 1) let engine cool down all the way 2) pull plug wires off plugs one at a time. 3) remove plugs with proper spark plug socket. 4) replace plug 5) replace wire 6) move to next

...two spark plug wires on it, usually on opposite ends. There is no distributor. If you want to change the plugs and/or wires, do ONE at a time, so that you keep the wires connected to the correct

...that is ideling rought & lots of missing off a stop. had codes PO001,03,05. Had wires & plugs replaced 2 weeks ago & still running rough. Now experiencing PO102, 04, 06 codes. So it ...

...is.....in order of probability.... Bad plug. Bad wire. Bad cap...if present. Bad rotor...if present. Bad coil....if coil per cyl. Crossed wires. Bad module. Bad injector. No compression. Bad

...wires on a 2003 hyundai santa fe, the dealer wanted $400.00 so I did it myself on the small V6 I think it is a 2.6L, first by the right plug they are about ten bucks a piece and also by plentium ...

...i think that there 6 bolts that holdthat down remove this and the coils and plug wires are visable there 2 iignition coils and 2 plug wires right on top of the motor. they may be uinder engine ...

tripped the inertia switch under the hood on the side of the shock tower. on the Isuzu they run the plug from the seat through the carpet to the frame to the fuel pump. my guess is they didn't plug it

...plug wires. Now my car won't start. 2002 Santa Fe Mechanic told me it was reading a 4 which meant I needed to replace the coil pack (only one) and the plug wires (2). So I did that. Now the car ...

wires and then replace. It was too simple. I can help you with the coils. The coils are screwed to the valve cover. All you need to do is unplug them , attach the new ones and plug them back in. It is