2003 Hyundai Santa Fe "1 engine timing mark" Questions

...timing belt has 70-80,000 miles. change belt start no tolerance engine with timing marks on engine runs put has pop once in a while . "POP" LIKE A BACKFIRE???.....TIMING BELT IS 1 OR MORE TEETH ...

...engine cover. How to adjust the tension of the timing belt Rotate the crankshaft 2 turns clockwise and measure the projected length of the auto tensioner at TDC (# 1 Compression stroke) after 5 ...

...1 is right. The Hyundai engine is called an interference engine, which means that when the timing belt breaks, it will allow the valves to hit the pistons and you will ruin your engine. Do yourself a ...

...timing book we have. we had other people come and check it out they all say the same thing that it looks right and should work but no compression in either cyl 1 or wen screwing with it cyl5 we know ...

...1. If engine disassembly is required that involves removing the camshafts or timing gears, set the #1 cylinder to TDC compression, wipe away any oil, and mark the following items in relation to each ...

...engine. 9.Loosen No. 1 idler pulley bolt 1/2 turn. Rotate crankshaft pulley 2 full revolutions clockwise from TDC to TDC. 10.Ensure timing mark on crankshaft pulley aligns with "0" mark on No. 1 ...

...timing marks are, dot on camshaft pulley and mark on cylinder head at approx 4 o'clock, crankshaft marks are dot on crankshaft pulley and dot on engine at approx 1 o'clock hpoe this helps Regards ...

...1.8L Engine (see Figures 1, 2, 3 and 4) Disconnect the negative battery cable. Remove the timing belt covers. Rotate the crankshaft and align the timing marks located on the camshaft pulleys and the ...

...engine. 9.Loosen No. 1 idler pulley bolt 1/2 turn. Rotate crankshaft pulley 2 full revolutions clockwise from TDC to TDC. 10.Ensure timing mark on crankshaft pulley aligns with "0" mark on No. 1 ...

...engine Cylinder #1 at top dead center. Mark on the camshaft gear is straight up,as referenced to engine. Note that the engine tilts to the rear so reference the flat line of the head for 12'oclock ...