...bolts 1.5L cylinder head bolt torque step 1 18 ft lbs. step 2 60 degrees step 3 additional 60 degrees 1.6L cylinder head bolt torque step 1 26 ft lbs. step 2 90 degrees step 3 additional 90 ...
...head bolt torque Click on the images Rusty Weeks. ...
Question about Hyundai Accent
...torque specs for re-tightening the rocker cover? Thanks! not specifically , but just snug it up then turn 1/4 turn Usually head cover bolts are torqued to about 10 lbs. It is just enough to squease ...
...torque crank bolt to =140-150 Nm A LITTLE HINT ? b4 you remove the water pump belt ? slacken thefour 10 mm headed bolts (spanner size) that secure w/pump pully to pump it will be easier to halt ...
head-bolt locations, it would be a good idea for you to purchase a vehicle specific repair guide that will show this info. Take particular note about the TTY (Torque to Yield) bolts used on 2 of the 3
...head bolt torque specs for a 1996 saturn sl Quote: Originally Posted by norvelplagbao52 1993 saturn sl2 1.9 dohc cylinder head torque specs and sequence Cylinder head bolt tightening procedure: ...
...head bolt torque specs I have 1994 Oldsmobile Cutlass Supreme with 3.4 Liter engine. I am replacing the head Gaskets and need to know the proper torque specs for the cylinder head gaskets. My manuel ...
...Head Bolt Torque... Torque Sequence -------------------- Front | 7 2 4 6 | Of | 5 3 1 8 | Engine --------------------- | 5 3 1 8 | | 7 2 4 6 | --------------------- Step 1 - 12 Point bolts: Torque to ...
head bolt location-tighten the head bolts 1 to 8 accordingly using the four-step torque turn method Here are the steps: 1. Bolts 1 - 8 to 61 N•m (45 ft-lb) 2. Bolts 1 - 8 to 88 N•m (65 ft-lb) 3. Bolts
...bolt 1/4 turn in order 5. Tighten all bolts an additional 1/4 turn in order. ARP Head Studs 1. Tighten all bolts to 40 ft-lbs 2. Tighten in steps of 10 ft-lbs increments until the specified torque ...
1,518 questions posted
Usually answered in minutes!
1,082 Questions
1,047 Questions
517 Questions
500 Questions
255 Questions