2000 Hyundai Accent "evap purge valve" Questions

Question about Hyundai Accent

Evap code showin on my

EVAP CANISTER PURGE VALVE WILL CAUSE CHECK ENGINE LIGHT TO COME ON.CHECK EVAP CANISTER PURGE VALVE WIRING FOR DAMAGE OR DISCONNECTION.YOU CAN HAVE FUEL TANK EVAP LEAKS AT FUEL FILLER TUBE SEAL OR FUEL

Question about Hyundai Accent

1 Answer

2006 hyundai accent, trouble code p0455, what is problem and the fix?

...is problem and the fix? No running or performance problems, just the dash light P0455-EVAP system large leak detected. Check hose connections, intake leak, EVAP canister or EVAP canister purge

Question about Hyundai Accent

1 Answer

2000 hyundai accent evaporator fault gas cap ok

...FUEL TANK VAPOR LINE CLOGGED OR DAMAGED.FUEL TANK PRESSURE SENSOR BAD OR CIRCUIT OPEN.EVAP PURGE OR EVAP VENT VALVE DAMAGED OR FAILED.EVAP CHARCOAL CANISTER IS CLOGGED OR LOADED WITH WATER OR

Question about Hyundai Accent

3 Answers

I have a 2001 Hyundi

...EVAP PURGE VALVE" on the Actuation Test mode. 6. Activates "EVAP PURGE VALVE" by pressing "STRT(F1)" key. 7. Verify PCSV release vacuum while valve is activating(should hear a faint click from PCSV). ...

Question about Hyundai Accent

2 Answers

P0496 code

purge valve P0496-evap emissions high purge flow fault you need to take your car to Autozone and have them read then clear the code before worrying about anything,it needs to come back on to be a hard

Question about Hyundai Accent

1 Answer

2001 Hyundai Santa Fe Error codes BB1,BB2,BB3,

...Purge Contro Solenoid Valve, Fuel Tank Pressure Sensor, EVAP tubes & hoses, Fuel Pump Gasket, fuel tank itself, check valves, Electrical Wiring to and from the ECM and components. Best solution: ...

Question about Hyundai Accent

1 Answer

Problem Check engine light is on

...Experts solve your ''evap emission control system purge valve C is open p0444'' Check engine light is on. Where is the temperature sensor located? try looking for the temp sensor on the air intake ...

Question about Hyundai Accent

2 Answers

Each time that I fill up my gasoline tank, my car doesn't want to start. Once the car is started, I have to keep the idle up because of rough idling. when I do start to drive, No other problems..

evap system vacuum hose or possibly a bad vent valve or purge valve.Most of these components are easy to access and replace with the exception of the vent valve which is located in the top of the fuel

Question about Hyundai Accent

1 Answer

I have a 2007 Hyundai Accent 4 cyl 1.6 engine GLS, have code P0496 and engine lite comes on and so does the gas cap lite.

...P0496 could mean 'purge valve replacement, but what else could this code mean???? P0496 EVAP Flow During Non Purge Condition Try this link.. it's information is very thorough and accurate. Good ...

Question about Hyundai Accent

1 Answer

My check engine light is on and everytime i get

...evap system, The no start problem can be resolved by replacing the Purge Control Valve, Hyundai p/n 28910-22040. These are warranty items. The O2 sensor trouble code was probably from the over rich ...