Question about Hyundai Accent
...hand brake about 3-4 clicks and that would be appropriate tension... hi from the uk may i offer this advice? considering year of car it would be best to check condition/wear of rear brakeshoes first? ...
...hand brake feels like i works but i get no stopping power from it at all. The rear drums, shoes and hardware have just been replaced. The cable has been attached for the brake. The auto adjust ...
i just got my handbrake adjusted in my hyundai excel. whenever i pull up on a slope it still rolls back with the handbrake on If the hill is steep or is covered with dirt or sand then you may not have
...hand then press b/pedal a cople of times to centralise shoes to drum ? if drum still rotates freely with no binding on shoes ? then re assemble carry out same proceedure on other side ? do not adjust ...
Question about Hyundai Accent
...hand. Basically, the switch needs to be pressed in to switch the brake lights off, when the pedal is in the normal position.Happend on my 2000 Accent, and nearly left me with a flat battery. I ...
hand and see if lights go off ? if so then you will need to adjust the b/light switch which is positioned adjacent to pedal and can be screwed inwards towards the pedal untill the plunger on switch is
...brakes exposed there are two slide bolts holding the caliper in place loosen both and remove then wedge a screw driver between the inner pad and the rotor and lightly pry towards you to take some ...
Question about Hyundai Accent
How do I get the dash lights to work? The switch on the left side is not working and I do not know what the replacement part is called. My dash board lights do not work although lights come on when ...
Question about Opel Cars & Trucks
...,then back off till brake are free to spin wheels pull hand brake leaver up three clicks, adjust hand brake cable till brakes just start to bind, release hand brake leaver , wheel should spin freely
check lining to drum adjusters are free and adjust if need be, pull hand brake on three clicks, adjust cable so brakes just start to bind release hand brake and make sure the wheels are free to turn
1,518 questions posted
Usually answered in minutes!
1,082 Questions
1,047 Questions
517 Questions
500 Questions
255 Questions