1993 Hyundai Scoupe "tighten valve cover bolts 93" Questions

Ad

... lbs.) Second - All to 88 Nm (65 ft. lbs.) Third - All (again) to 88 Nm (65 ft. lbs.) Fourth + 1/4 turn Do not use a torque wrench for this step. For the valve cover gasket bolts tighten to 100 in. ...

Ad

...Valve 3 shows you the order to use for the torque wrench 1) bolts #8 + 9 are dowel bolts. Make sure they go in 1st to align the VB. 2) make sure you use a torque wrench to tighten the VB bolts ( 96in ...

Ad

Question about Hyundai Motor S

2 Answers

...tighten the bolts to their final torque of 72 ft. lbs. (100 Nm). Fig. Fig. 9: Cylinder head bolt torque sequence A Fig. Fig. 10: Cylinder head bolt torque sequence B Fig. Fig. 11: Cylinder head bolt ...

Question about Hyundai Motor S

1 Answer

...tighten the bolts to their final torque of 72 ft. lbs. (100 Nm). .Fig. Cylinder head bolt torque sequence B Fig. Cylinder head bolt torque sequence B Fig. Cylinder head bolt torque ...

Question about Hyundai Motor S

1 Answer

...tighten the relief valve plug to 27 ft. lbs. (37 Nm). Installation of the remaining components is in the reverse order of the removal procedure. 3VZ-E Engine Raise and support the vehicle. Remove the ...

...tighten it to the following: 1990 Accord: 166 ft. lbs. (230 Nm) 1991?93 Accord: 159 ft. lbs. (220 Nm) 1992?93 Prelude: 159 ft. lbs. (220 Nm) 1994?95 Accord and Prelude: 181 ft. lbs. (245 Nm) Install ...

...tighten it to the following: 1991-93 Accord: 159 ft. lbs. (220 Nm) Install the dipstick tube and dipstick. Install the side engine mount (refer to engine removal and installation for procedures). ...

valve, be sure to install the thermostat with the pin facing upward. To install: Install a new thermostat the gasket, O-ring or sealant (as applicable). Always install the spring end of the thermostat

...valve from cylinder head cover. Raise and support vehicle. Remove intake manifold support bracket, then the EGR pipe from intake manifold. Lower vehicle and remove intake manifold attaching bolts and ...

Question about Hyundai Motor S

1 Answer

...valve cover using a 10 mm socket. Place the jack behind the left front wheel where the arrow is located indicating the jack location, and raise the vehicle. Put the jack stand under the subframe ...

Not finding what you are looking for?
1993 Hyundai Scoupe Logo

14 questions posted

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...