2001 Saturn SC "remove bushings shift cable" Questions

...shift cable in about 1 hour. I'm a novice as well. A few clips at the transmission, pulling the bushing off at the gear shift. Hardest part was getting it through the firewall without totally ...

...shift cables, speedo cable or wiring as applicable, sometimes both, any lines, cables, wiring that is going to the transaxle.  Remove the slave sylinder and set it to the side and tape it to ...

...remove the shift cable from a pt cruiser gt5 speed Chrysler PT Cruiser shifter cable bushing replacement ... ? 5:28 https://www.youtube.com/watch?v=akgIKm1pQLM May 21, 2014 - Uploaded by MotorCity ...

...what I am saying. Please note that it is NOT necessary to remove the steering wheel to do this, but you will need to remove the upper steering column shrouds if the shift tube bushings are

...REMOVE CONSOLE, PUT SHIFT LEVER IN SECOND GEAR AND DISCONNECT THE CABLE END FROM THE LEVER.DEPRESS THE TWO TABS ON THE CABLE HOUSING USING PAIR PLIERS REMOVE THE CABLE FROM THE SHIFTER.YOU HAVE TO ...

...bolts and remove old bushings ,install new ones and reassemble the Colum .All so check for lose bolts at the bottom of shift tube ,a bracket is bolted to tube that connects it to the shift

...what I am saying. Please note that it is NOT necessary to remove the steering wheel to do this, but you will need to remove the upper steering column shrouds if the shift tube bushings are

...in 1,2,3,4,5,or reverse Hello: Sound like the Shift Cable Bushing found at NAPA for $20, or you can go to Saturn and replace both cables for $200, remove the console and replace the bushing. Good ...

...to remove shift cable from column. he shift linkage bushing is gone and I am trying to replace the entire cable w/ a new one. Trouble is getting old cable out of the column. unplug the old ...

shift leaver and cable end had snapped off the pin. removed the shift leaver, ground the head off of the pin and knocked it out with a pin punch. Bought Hillman Bronze Shoulder bushing #882991, a 1/4"