1993 Saturn SL2 "tighten belt hydraulic pump" Questions

Ad

...belt off and the tensioner pully all the way off. then you have access to the timing chain cover. You have 4 bolts on the bottom (oil pan) that are 10mm, 1 bolt in the middle that is 8mm and several ...

Ad

Question about Saturn SL2

1 Answer

...belt as far as possible, temporarily tighten the tensioner mounting bolt to 14 ft. lbs. (19 Nm). NOTE: Remove the flywheel holder before rotating the crankshaft. Reinstall the holder to torque the ...

Ad

belt slack. Reinstall tensioner, and tighten fasteners as follows: Mechanical tensioner-250 inch pounds. Hydraulic tensioner assembly pulley bolt-50 foot pounds. Hydraulic tensioner assembly and pivot

Question about Saturn SL2

1 Answer

Tighten the mounting bolts to 18 ft-lb. (25 Nm). Install the power steering pump pulley using Steering Pump Pulley Replacer T65P-3A733-C, or equivalent; the pulley face must be flush within 0.010 inch

belt needs tighten can it be done? its lose and is making a lot of noise im wondering if I can tighen it or replace it? Are you sure it's loose and making noise? It's' hidden beneath the timing cover.

Question about Saturn SL2

1 Answer

belt is tensioned by pivoting the power steering pump assembly, do NOT fully tighten the mounting bolts at this time, since you will just have to loosen them again for belt installation and adjustment

...belt and water pump done now the tapping noise has got worse. real loud on start up then it is a constant tapping. been told it could b valves needing adjusting. do u have any sugestions & do u ...

Question about Saturn SL2

1 Answer

...belt how to tighten? Before tightening, check to see how long the expected lifetime of your belts are; adjusting a cracked, stretched belt can lead to its failure; a failure that can be more than ...

belt. 7 times I have to go in there I don't know what to try next. all new parts. you have to release the tensioner as it is in neutral position what you need to do is push in on the tensioner and let

belt is tensioned by pivoting the power steering pump assembly, do NOT fully tighten the mounting bolts at this time, since you will just have to loosen them again for belt installation and adjustment

Not finding what you are looking for?
1993 Saturn SL2 Logo

676 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1992 Saturn SL2
1992 Saturn SL2

145 Questions

1991 Saturn SL2
1991 Saturn SL2

35 Questions

Top Saturn Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...