2005 Kia Rio "change brake pads" Questions

...brake pads. I am changing the brake pads on a 2004 kia rio. I was able to get the pads on the left side of the car no problem. Put the pads in the caliber on the right side, but the pads opposite the ...

...brake pads on a kia rio 2004 i am changing the brake pads on my rio, i normally leave this to the garage.lazy? anyway i have not done the brakes on a kia before.my omners manual does not give any ...

...brake pads are now worn and need replacement, but it's impossible to be certain without having the car inspected. If the pads are worn and if you have replaced brake pads before then it's a fairly ...

...change rear brake shoes Tools Needle Nose Pliers Hammer Phillips Screwdriver 9/16 Socket and ratchet (not a deep socket) Large C-Clamp Center Punch 1. Put front of vehicle on jack stands. Brace back ...

...change the front brake pads on my 2003 Kia Rio? What will I need and how should I go about it? I would love a step by step "guide for dummys" kind of explanation because I am not really mechanical! ...

change front brakes on 2002 kia rio and the calipers are stuck so I can't slide in brake pads you need to depress the piston in caliper,try a vice clamp to get that caliper pressed back for clearance!

...change back breaks on kia rio 2002 Watch the videos Becky. Go to Bing homepage Becky, Check the attached links,instruction and guides ( link #2 gives you some idea of tools needed), Good luck "I hope ...

...change my brake pads on my Kia Rio 2005. Anyone know where I can get hold of a manual online as I need to do it myself. Please email me at [email protected] and i will send you one. Thanks. Best ...

...brake caliper back into the rubber when changing the pads Been working for me with a c-clamp for years now. It should be fine, just use the old brake pad in between the clamp and the caliper piston, ...

...brake pads on a 2005 Kia Rio. Is this simular to other cars or should i have an expert do it. This worked for me. 1.Put front of vehicle on jack stands. Brace back wheels 2. Remove front wheel. 3. ...