1995 Kia Sportage "radiator bolt" Questions

how do you replace a radiator in a 1998 kia sportage? Hi there, Below are the steps.. REMOVAL Caution! Never remove the radiator cap when the engine is hot. Remove the radiator cap from a hot engine ...

...bolt is to drain the radiator. Remove the bolts, 10 mm, from the fan shroud and radiator, remove the upper and lower radiator hoses, and lift the radiator up about 6". The upper pump bolt is now ...

...bolt 89 inch lbs. (10 Nm) Radiator hoses and tighten the clamps Lower splash shield Negative battery cable Fill the cooling system. Start the vehicle and bring the engine to operating temperature. ...

...bolt 89 inch lbs. (10 Nm) Radiator hoses and tighten the clamps Lower splash shield Negative battery cable Fill the cooling system. Start the vehicle and bring the engine to operating temperature. ...

...radiator hose. Remove the 4 attaching nuts to the clutch fan. Remove the 5 fan shroud bolts. Remove the fan and shroud as an assembly. Remove the 4 splash guard mounting bolts and the splash guard. ...

...bolt. Place the splash shield back on the vehicle and insert the coolant back in to the radiator. Reattach the battery terminals and turn on the engine to check that the water pump is now working ...

...on 1995 Kia sportage Drain the coolant and dispose of properly, Remove the clamp on the upper radiator hose where it connects to the elbow on the engine block. Remove the hose from this ...

...a repair manual for 97 Sportage ..need to know where the thermostat is located just follow the top radiator hose toward the engine. that metal housing that the radiator hose hooks up to has the ...

...radiator hoses, resservior tank hose, fresh air duct remove engine fan and shroud together loosen altenatormounting bolt and adjustment bolt remove altenator belt and fan pully, remove the 3 fan ...

radiator hose. Remove fan clutch assembly bolts. Remove 5 cooling fan shroud bolts. Remove fan shroud and fan as an assembly. Loosen alternator mounting bolts and remove drive belt from pulley. Remove