1998 Porsche Boxster "windshield wiper arm moving blade" Questions

...the driver side wiper moved out of windshield and got stuck out of the windshield. any idea how to fix it? Could be loose wiper arm. Are the blades heavy. Too big of wiper blade will cause ...

Windshield Wiper System, Ranger/Explorer The windshield wipers are actuated by a permanent magnet, rotary-type electric windshield wiper motor (17504) . The two windshield wiper pivot arms (17526) and

...windshield wiper assembly ford excursion How do I remove the windshield wiper assembly on a ford excursion from the shaft that moves the wiper back and forth? Wiper Pivot Arm Removal and Installation ...

...wiper arm will not stay flat on the windshield. I can move the base of the arm up and down at the bottom where it attaches to the motor, which seems to be loose. This seems to be causing the wiper ...

wiper away from the windshield, then push on either end of the blade, follow blade to pivot point at center, where blade pivots back and forth on wiper arm (wiper arm will not be moving as you do this

windshield and I have to manually push it down. Can someone tell me what is wrong please. At the base of the wiper arm there is a plastic cap,pop this off ,underneath there is a nut that holds the arm

...stops hitting the other wiper blade. What could it be? the fuse? the motor? im not sure bent/broken wiper arms under the base of the windshield..remove the vent cover and service/replace broken

...Windshield Wipers You need to replace only the wiper blades which are attached to the wiper arm with a clip, simply press the clip and slide the old wiper blade out of the arm, looks like a "u" bend ...

...wiper blade began to move erratically, and finally flopped off the windshield onto the left rearview mirror. Now the passenger side blade still works well, but the drive-side blade will not stay in ...

...Windshield wiper is out of position, how can I move it on its hub? There's a plastic cap covering the 13 mm nut that holds the wiper arm to the wiper transmission, use a small flat blade screwdriver ...