Question about Smart Cars & Trucks
water keeps shooting out of tiny hole on top of smart head only when the pump is on. what is causing it and how can it be fixed? Please explain
...water pump is froze? I am a 1000 mile away so I cant look at it. Any advice please. You need a belt and water pump. Hope everything works out for her. Good luck!!! First you need a belt then i would ...
...water only until I switch the pump switch on and off it works. I serviced the pump, changed the bearing, seal and circuit board...same issue. Would the pressure gauge cause this? No, but the pressure ...
Question about Cars & Trucks
...water pump - Damaged radiator - Damaged (radiator or heater) hose or loose clamp. - Failed head gasket Water as a coolant is not as efficient as anti-freeze so the engine may heat up sooner. If the ...
...water pump and timing belt at the same this it is all on the same track and compartment!fact makes no sense to change seal and go through that 7-8 hour labour rate charge and 2 months later do it ...
...water pump ( 3.4 L engine )as I drove to part store the care temperature raced up to 230 with in 1.5 miles but no heat from heater blower in the car just cold air. On the way back from the part store ...
water pump now possibly has been problem all along Smart man using a scanner for the actual temp. Assuming you're not losing coolant....2 things I'd look at here, 1st is you may have air in the system
...water pump. What do I need to know? Any other possibilities? I'd appreciate the feedback. I am a hardworking student and hope that this is not too serious that needs a major repair. Thank you kindly. ...
...WATER PUMP IN TANDEM IF THOSE SHARE A COMMON BEARING (A ROD EXTENDING TO BOTH). Regardless of what you hear, this is the proper method because when the bearing goes out on one side, it affects the ...
844 questions posted
Usually answered in minutes!
685 Questions
635 Questions
457 Questions
277 Questions
284 Questions