...remover the drive belts, timing belt, intake manifold and exhaust manifold, removed all ten head bolts under the valve cover. but the head will not come off, do I have to remove the camshaft ...
I have a2003 Rio and I just put a new head on it. When I checked the oil it appeared to have water in it (like chocolate milk)..I opened the cap on top of the valve cover (where you put the oil in the
...prob need too get a second oppinion it could be as little as just replacing the valve or a whole head too an engine or maby thats not even the problem what did the car do? This could be highly ...
...thermostat, lots of antifreeze, still overheating Then the problem is the water pump or a cracked Head, blown head gasket or cracked cylinder wall causing over pressure in the cooling system. ...
2001 kia reo 4cyl. dohc replaced head gasket and had head re-surfaced put it back together and it acts like there is no compression Did you recheck the engine valve timing (Timing Belt) after you ...
How do you remove the head unit from a kia rio 2003 ls? You really need to get the Haynes repair manual for your vehicle. Aside from having to remove and disassemble a great deal of the Engine to get ...
...and check for damage. This engine is an interference engine which means there probably will be head and piston damage. A used engine will be about $1400 or so. If you can do the work the
I need to know the height of a Kia Rio 1500cc 16v cylinder head cylinder head height of a Kia Rio 1500cc 16v DOHC engine go to kiatech .com
someone told me it maybe be head gasket or cracked head what would be the signs of that SO MUCH STEAM FROM UNDER THE BONNET.and lack of water in radiator,oil level getting higher,no power, next would ...
Can't figure out how to get the Head's off this kia rio 2001 is there a way that you may know? do you mean cylinder head?? petrol or diesel engine
844 questions posted
Usually answered in minutes!
685 Questions
635 Questions
457 Questions
277 Questions
284 Questions