...Engine Install the timing chain cover. Torque the retaining bolts in the proper sequence and to specification. The engine should not be started for at least thirty minutes after timing chain cover ...
engine support lower bracket. Image 5 2. Install the tensioner arm, shaft and plain washer to the cylinder block. Tightening torque: 35 -55 Nm (350-550 kg-cm, 25.82 -40.57 ft. lbs.) Image 6 3. Install
...engine to TDC. Loosen the tensioner pulley center bolt. Apply 44 inch lbs. (5 Nm) torque to the tensioner pulley as shown and tighten the center bolt to 32-41 ft. lbs. (43-55 Nm). Fig. Adjusting the ...
...engine to TDC. Loosen the tensioner pulley center bolt. Apply 44 inch lbs. (5 Nm) torque to the tensioner pulley as shown and tighten the center bolt to 32-41 ft. lbs. (43-55 Nm). Fig. Adjusting the ...
...Torque settings for Crankshaft & Cylinder Hrad Hi I have a Opel Corsa utility 1.7D I am doing the hole engine over but I need the setting for it 2000modle Corsa and the engineers are rebuilding the ...
Question about Ford Cars & Trucks
torque settings. Ford Workshop Service and Repair Manuals > Transit ... Workshop Manuals https://workshop-manuals.com > engine > page_1261 Stage 2: Tighten an additional 90 degrees (one-fourth turn
...engine must be cold). Install components in reverse order of removal. Fit cranckshaft pully. Tighten crankshaft pully bolts 8. G4-J: Tightening torque: 12-15Nm. G4-N/G4-k: Tightening torque: 10-12Nm ...
...engine mount through bolt and torque it to 87 ft. lbs. (118 Nm) Upper radiator support crossmember Torque strut bracket Upper torque strut A/C lines and pressure switch Exhaust system to the manifold ...
Question about Hyundai Cars & Trucks
...Torque Sequence Fig. Main bearing torque sequence-2.4L engine Fig. Main bearing torque sequence-2.5L engine Fig. Main bearing torque sequence-3.3L engine Fig. Main bearing torque sequence-4.0L ...
...the RH front wheel. Tightening torque :88.3 ~ 98.1N.m (9.0 ~ 10.0kgf.m, 65.1 ~ 72.3lb-ft) 19.Install the engine cover with bolts. Tightening torque :3.9 ~ 5.9N.m (0.4 ~ 0.6kgf.m, 2.9 ~
1,649 questions posted
Usually answered in minutes!
1,065 Questions
969 Questions
705 Questions
468 Questions
212 Questions
