2002 Jaguar X-Type "remove clutch brake pedale box" Questions

Ad

...clutch slave cylinder is faulty/leaking, is there any sign of fluid loss from the resovoir, it uses the brake resovoir for its fluid supply, the leaked fluid is probably in the flywheel houslng, big ...

Ad

...remove clutch pedal. 9- pull brake pedal out of plastic insert, this will break there is no way to remove this without breaking the plastic clip. get a new brake pedal clip insert for a Mk 3 golf ...

Ad

...clutch master, you must remove the under hood fuse box and air filter housing assm, then remove the hydraulic line that goes into the inlet port of the clutch master, then inside the car, remove the ...

Question about Jaguar X-Type

1 Answer

with manual transaxles, remove clutch hose from brake/clutch reservoir. On all models, remove master cylinder nuts and remove master cylinder. To install, reverse removal procedure. Bleed brake system

...clutch pedal, to stop vehicle movement they also have the foot resting or pressing on the brake and a hissing noise here can be from a vacuum leak at the brake pedal from the brake booster easy to ...

Question about Kia Cars & Trucks

1 Answer

...starting with an empty clutch reservoir and locking first the clutch nipple and then the brake nipple when the clutch reservoir is full. Ensure the brake reservoir doesn't run low in the

clutch slave cylinder.Use your 8mm wrench to open the valve one full turn, don't remove it. Stick your hose over the bleeder valve and have it drop off into a container.Be sure to check the clutch

Question about Jaguar X-Type

1 Answer

...clutch pedal. a clip keeps the plunger from coming loose from the pedal.,Remove the clip and pull the plunger back away from the pedal. Now, you have already disconnected the metal line and loostened ...

...Remove the clutch pedal locking clip and pin to the master STEP 9 Remove clutch pedal nut STEP 10 Remove the bracket that holds the clutch master STEP 11 Remove the clutch master nuts and remove the ...

Question about Jaguar X-Type

1 Answer

remove hydraulic lines. You'll have to disconnect the clutch pedal from the master cyl. rod under the dash. You'll need the ability to raise and support the vehicle properly enough to access the slave

Not finding what you are looking for?
2002 Jaguar X-Type Logo

2,484 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jaguar Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...