2006 Hyundai Sonata "remove black foam back new" Questions

...fore at least a mile keep driving and if you notice a diff in runability but still have a little black smoke buy another can of sea foam and repeat service NAPA has sea foam on sale this ...

...remove the filter and blow into it from the side that faces the gas tank and the fuel inside should blow out and be sooted with a color distortion either gold or black fuel should come out also be ...

black tabs that holds the cabin air filter in place. 9) Insert your finger or tool to pry the cabin air filter away from the tabs. 10) Remove old cabin air filter. Remember to reinstall the clip parts

foam insulation. Once the insulation is removed you can see the filter 8 inch long by 2 inch wide black plastic face plate. You must slide the face plate toward the passenger side door. The face plate

...remove the core. Installing the New Core INSTALLING THE NEW CORE--- # Step 1 Install the new core into the HVAC module, attaching a new seal onto the drain tube. Attach the core cover from the right ...

black and yellow wires. you'll need a small flat head screwdriver to separate the harness's. on the glass mounted lights there was a plug that went into the body. after about a half hour of my fingers

...black spot burned in the foam. This is where a wire had broken. I carefully pulled the wire together, then soldered it. I put everything back together, and it has been working ever since (about 6 ...

...remove the cushion, you'll see right near the door jambs on each side (under the seat) a 2" or so diameter black foam or rubber grommet with a wire running through it. That's the speed sensor wire. ...

...black fabric is any way to fix it without buying a new one, my car does not have a warranty any more...thank you I have the same problem. I got acetone and removed the old glue from the glass. Then I ...