...water pump is an internal pump and needs to be replaced with timing belt service. if it is leaking, then you need to change the timing belt as well. probably not something you want to do in the back ...
...water pump on 2003 kia sedona To change a water pump you need to remove the fan belt, than you can remove water pump's bolts and take it out, replace the gasket as well and put the new pump in ...
where is the water pump located in a kia carnival 2001 model is in cylinder block you have to take out timing belt. engine heat
Location of the crankshaft position sensor on a 2005 Kia Sedona At the front of the crankshaft. if its near time for the timing belt, you want to replace it along with any pullies, tensioner and water
Recommend you have the timing belt, water pump and sensor changed all at the same time since this is so labor intensive. Take it to a shop unless you are a really good mechanic. Costs about $600-$700
...water pump. Now, I can't get the van started. I originally thought the timing was off, so I reset the timing belt to the locations on the car. Now, nothing happens when I turn the key. OOPS ,big ...
water pump pulley. Remove the intake manifold. Remove the connector bracket from the left cylinder head cover. Disconnect the right ignition coil connector, condenser connector and remove the bracket.
...water pump The crankshaft position sensor is mounted on the engine near the crankshaft. Operation The crankshaft position sensor is a Hall-Effect sensor that senses the crank angle (piston position) ...
water pump not worki ng how to replace water pump,leaking coolant all over' the water pump is located in the front of the engine behind the waterpump. you'll need to remove the accessory belts,crank ...
1,191 questions posted
Usually answered in minutes!
1,065 Questions
1,036 Questions
969 Questions
468 Questions
212 Questions
