2005 Hyundai Elantra "replace hood release handle 1998" Questions

...latch cable (A) from the vehicle. NOTE: Take care not to bend the cable. Installation is the reverse of removal. NOTE: Make sure the hood latch cable is connected properly. Replace any damaged

...hood open? Their is a cable in the control access the cable and pull on it with a pair of pliers then replace the part Get a cutter and cut back the outer plastic or metal sheath over the inner cable ...

...Hood Release Cable that attaches the cable to the Handle snapped I removed the plastic and the handle but can not locate the cable...do I need to replace the whole cable or just the plastic part... ...

...replace it' https://parts.lexus.com/p/Lexus__ES-330/Hood-Release-Cable/63136210/5363033120.html Full instructions for a GS ...

...How can I replace it? very simple the cable is attached to hood. any body with a little common should be able to do it but get a replacement first, that will help you understand what has to be

...tight), you can pull the vise grips and the hood release should pop open. I can tell you now, the replacement part is a dealer item only. With a little patience, and time, you can replace

...hood. then replace the cable. the further you can reach up under the panel the better your chances of getting past the broken part of the cable and avoid removing the grill. you might also be able to ...

...to insert a new screw to hold handle in. Can this be fixed or do I need to get a new part? you need a new hood latch cable but you need to make sure your hood is up before you atemp to replace ...

...it with a pliers, if it's broke at the release under the hood it's going to a little harder you will have to get up under the hood and manually release the hood before you can replace the release ...

...where the hood latch is. If you can see the cable and can grab it with some channel locks, than grab and twist a couple times, you should be able to get it that way. Then replace the cable and