2002 Land Rover Discovery Series II "head spin" Questions

head or engine. I have no leaks that I see.I have took the thermostat out and bypassed the heater core. Nothing works? ckeck thefan clutch if you can spin it easy by hand eng. off!  make sure the

...a battery drill on the cable....dont start the engine but leave the ignition on a spin the drill if your speedo dont work then you need a new speedo head.....but that is very

...spin except crank. engine turns about a quarter turn then locks pulled oil pan all looks good took off timing belt cam spins and all lifters look good then pulled head intake was clogged with carbon ...

...if NO? the pull the center cable out. of main sheath. is it broken? no, then the head is bad. (remove head , spin it , is head good) no, bad head. yes, then the cable ends are not meshing

...is no resistance at all then you have a bigger issue. Could be dropped valve, timing, warped head, etc. The amount of compressioninside the cylinder will not allow it to spin over freely and

...HEAD. 2: BAD CABLE 3: tranny gears x2 bad,one or both stripped, (plastic gears) the test is easy, spin it from down under. and look. do not pull the cable down under or the cable will disengage the ...

to read the index with is generally on the inside track near the center. If the CD doesn't spin or the head doesn't move the CD player will auto-eject the CD. I'd have that player serviced or replaced

head I think, get ready for the fight), remove the little clips from the wheel studs (usually you can pry them up to the threads with a screwdriver then just spin 'em off)....that should do it....pull

Drivers side head lamp assy removal Can anyone tell me how to remove a light assy on driver side. I cannot remove the torx head screw. What size is it..Thanx....Larry if it is the torx head screw on ...

...of grippers onto the nut. If the bolt spins there must be some gap between the back of the bolt head and the licence plate. Use the tips of a pair of side cutters ("hollow" side out) to