1998 Jeep Grand Cherokee "zerk fittings" Questions

...power steering checked and was good. i can hear it comming from steering. sounds dry, any grease zerks? As far as the grease fittings are concerned, you should have between 2 to 6 fittings. 1 on ...

...CV joints they need to be steam cleaned, inspected, and repacked. With U-joints, there is likely a zerk fitting for grease. You don't otherwise service U-joints until they get loose to back and

...Zerk grease fittings so , can't be serviced. so i replaced them with those that can, then last near forever. wow. what deal that. 1988 jeep had those fittings new. if the mechanic, man handled ...

...drums you will see where the brake lines enter the drum itself,, near there you will see a little ' zerk ' fitting -- to this fitting you should place a clear hose over this fitting and run it into a ...

where are the grease zerk locations Tire shop is telling me there are no grease zerks on this vehicle to do a lube job On most newer cars there are no zerk fittings.

zerk fittings what is the size of the zerk fittings for the fromt wheels? this depends, most are 1/8 " thread as in the ball joints,tie rod ends, that is if we are talking of a car but you dont ...

...zerk, not zert...and anyway, grease fittings have zerks, and brake cylinders and brake calipers have bleed valves.  Zerks let grease in and somewhat restrict outward flow, while bleed valves let ...

bleeding brakes bleeding the brakes - look fo the bleeder ( zerk fitting ) on the side of the caliper, attach a 1/4 inch clear hose to this fitting and run hose into a catch pan or bottle,, make sure ...

Zerk fitting locations on 1997 Mercury Grand Marquis There may not be any. Most manufacturers are putting 'permanently lubricated' joints in the front suspension for upper and lower ball joints, tie ...

...to tell which joints are greasable. But, the parts that could have a zerk fittings on your van include the outer tie rod ends, and lower ball joints. So just take a look and grease where