2004 Honda Accord "error back fuse" Questions

...Error code 12-01: Voltage for VBU (Voltage Back Up). - Check fuse fuse number 1 (70 Amp), in the under hood fuse/ relay box. - Check Wiring. - EPS Control Unit. Code 12 normally relates to EGR. ...

...fuse and do that, (ask) or see alldata.com ore read the FSM. or pull battery neg. lug for 5min, (risky) but doing so, can kill the radio or nav options on cars. or worse. (newer cars, you can loose ...

...back in. I tried a few times, but now it just says Error on the digital display. How do I reset the radio so that I can put the code in? If you have tried a few times before NOT entering the right ...

error P0401 replaced EGR valve light still on Jason, -after you change the part you have to reset/clear the code -this can be done by either: (1) using the OBD2 code reader that Autozone used OR since

back pages of the manual. If you still can not locate it, log on to www.radio-code.com. There is a fee but much less then the dealer, Good luck and keep me posted. Be glad to answer any more questions

...back up lights work. When I put a continuity check on the negitive battery post, and the fuse it reads a short, when the parking lights come on. The short goes when the brakes are aplied or the left ...

...error when i try to play one of the cds, how can i fix this? The same thing happened to me. Supposedly you can't put burn cd in that radio. So I need to get it fix or get a new one. I took out the ...

...a USA car, (not stated) then it is in fact OBD2. and its a fact you can scan the car and see live errors. cranking on all OBD2 cars. (dead spark DTC ,dead, CMP , dead CKP) code, 340 , 355 etc? and ...

error 16 (injectors bad) because it doesn?t read the injectors volts. This main relay is located under the driver side dash above the cruise control unit. Lie on your back on the driver?s floor board;

...error e...Can anyone help? You only get like 10 tries this means you made to many attempts trying to put the wrong code in. Disconnect the battery cable and then try putting the code in the radio ...