...replace the camshaft sensor on my sebring can i replace the camshaft sensor myself on my sebring 2000 lxi I don't know where it is located on the 2.5l the camshaft sensor is not sold separately for a ...
...Replace the camshaft position sensor as required * Check the crankshaft position circuit as well * Replace circuit wiring and/or connectors as required * Diagnose/replace the PCM as required Test it ...
...Replace the camshaft position sensor as required Check the crankshaft position circuit as well Replace circuit wiring and/or connectors as required Diagnose/replace the PCM as required the camshaft ...
...Replace the camshaft position sensor as required Check the crankshaft position circuit as well Replace circuit wiring and/or connectors as required Diagnose/replace the PCM as required Also, the ...
2004 chrysler sebring 2.4l dohc. replaced camshaft sensor, crank shaft sensor and magnet behind camshaft sensor and the check engine light came back on and car jerks when i accelerate. the darn light ...
...replace the camshaft position sensor again. Remind them that just because it's new, doesn't mean it works. They should also check the wiring from the ECM to the sensor for continuity, to ensure that ...
...camshaft and crankshaft are located internally in the engine. To replace the engine would have to come out and completly rebuilt. Unless you have alot of experience in rebuilding engines I don't ...
...camshaft position sensor is part of the distributer .. so you probably have to replace the whole thing .. check the wiring and connectors going to the distributor to make sure they are not damaged .. ...
OBDC code says bad camshaft pos sensor, circuit OBDC code says bad camshaft pos sensor, A circuit failure, bank 1, But replacing the sensor does not clear the issue. After engine gets to full temp, ...
1,584 questions posted
Usually answered in minutes!
1,173 Questions
801 Questions
581 Questions
462 Questions
523 Questions
