2002 Chrysler Sebring "ignition fuse" Questions

Ad

Question about Chrysler Sebring

1 Answer

...did not release the transmission lock when you put it in last. Try putting it in and turning it to ignition several times. If that doesn't work, check out the fuses in both fuse boxes for blown

Ad

...the little wire inside should have no break between the two posts of the fuse. Don't forget to check the fuse panel inside the car also there should be a secondary ignition fuse in that panel

Ad

Question about Chrysler Sebring

2 Answers

...ignition relay or fuse problem. There are a few different fuses and relays that will be located on your fuse panel and under the hood that deal with your starting power and feed to ignition system ...

Question about Chrysler Sebring

1 Answer

...ignition switch to the ON position and momentarily to the START position. The engine cranked slightly then stopped. When I tried to restart the car, nothing electrical appears to work. I disconnected ...

...fuse keeps blowing for ignition wont start untill you replace fuse. what amp fuse should be in it. or what could be causeing it?? For your ignition you should use a 20-30 amp fuse. However, it sounds ...

Question about Chrysler Sebring

1 Answer

...in the Power Distribution Center in the engine compartment.  This fuse also supplies power to the Ignition Switch and the Starter Relay.HINT: If the starter cranks the engine, this fuse is

Question about Chrysler Sebring

1 Answer

are only numbers !!! My car 2005 Sebring 2.7 ck fuses with a test light.. ignition must be on when cking.... if theres a blown fuse replace it you dont need to know what fuse is what if all are good..

Question about Chrysler Sebring

2 Answers

...FUSE IN AS THIS COULD CAUSE FIRE. first find out what that fuse controls.. is it the fuel system, radio, PCM ect.. could be a ignition fuse but these tend to be bigger what size is the fuse you

...ignition fuse pops, can I use a 25 amp fuse? no you have a short in the collum Starter solenoid is most likely the cause of your fuse to blow. Never put a higher amp fuse as the possibility of fire ...

...fuse in turn the ignition switch to the start position. Does the fuse blow? If so, then the fuel pump and/or the wiring to it has a short. If the fuse doesn't blow then the starter solenoid or the ...

Not finding what you are looking for?
2002 Chrysler Sebring Logo

1,584 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chrysler Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...