...thermostat assembly into the engine outlet connector. Align air bleed with notch on the cylinder head. Install engine outlet connector onto cylinder head and tighten bolts to 110 inch lbs. (12.5
Question about Chrysler Sebring
How many hours does it take to change the heads on a 98 Chrysler Sebring 2.5? It's a 98 and not worth it. You'll pay for it , then have many other problems. Only to find out you have to rebuild the ...
...the bolt holding it and it slides out, the 2.4 engine the sensor is at the rear of the cylinder head at the end of the camshaft and the 2.7 engine the sensor is at the front of the engine at ...
...back side of the engine from behind the timing belt cover :) Those engines are noted for having bad head gaskets so I would look into having your head gasket cheked for leaks.If you look you should ...
torque specifications for 2.7L chrysler head bolts I need torque messurement for head bolts First, thoroughly clean all mating surfaces, then lubricate the cylinder head bolts' threads with engine oil
what would cause smoke to come out the exhaust pipe WHITE SMOKE IS BLOWN HEAD GASKET. BLUE SMOKE ENGINE BURNING OIL.DUE TO WORN PISTON RINGS AND WORN VALVE GUIDES.BLACK SMOKE EXCESSIVE RICH ...
...also give readings of engine performance smoke means problems white is coolant or water usually head gasket --blue usually means burning oil either valves/head needs work rings need rebuild or-- ...
if one of the heads is bent on the gaskget is it best to have engine rebuilt or get used one You can find a auto macine shop that will check out your head and fix it if it is not to bad.
...at a fairly fast pace. there is no external leaks and there is no other symptoms indicating a head gasket problem. Any ideas? I thought about pressure testing it but dont wanna fill the
1,584 questions posted
Usually answered in minutes!
1,173 Questions
801 Questions
581 Questions
462 Questions
523 Questions