2001 Volvo S40 "install valve cover gasket" Questions

Ad

...valve, renew gasket and re install. ade 13 years volvo tech its sitting right up front right side easy to replace star scewdriver and vice grips or pliers to remove plastic cover and start work Can't ...

Ad

Question about Volvo S40

2 Answers

...of silicone molded rubber, do not use an adhesive. Place the gasket onto the cover and carefully install the valve cover. Tighten valve cover bolts to the maintenance manual's torque

Ad

Question about Volvo S40

1 Answer

...Install the valve cover. Position the valve cover gasket. Position the valve cover. Tighten bolts in the sequence shown. Fig. The proper torque sequence for the 2.0L DOHC Zetec engine Install the ...

Question about Volvo S40

1 Answer

...install a new set of valve cover gaskets, as this is a fairly common problem ( valve cover gaskets ). Just unbolt the valve covers and remove them then scrape off the old gasket and install the new ...

Install new valve cover gaskets onto the valve covers. Place the valve covers into position. Reinstall the valve cover retaining bolts and studs and tighten in sequence to: 3.0L SOHC engine: 7 ft. lbs

Install valve cover to the engine, lightly oil all bolts and stud threads. Apply a bead of RTV sealant at the cylinder head to intake manifold rail step (two places per rail). Place the valve cover on

Valve Cover to Install the Seals. If the Valve Cover Gasket have not been replaced recently, go ahead and replace them as well, making sure you clean thoroughly BOTH surfaces before installing any new

Question about Volvo S40

1 Answer

...valve cover gasket for 1998 Plymouth Breeze and how would you install it? Buy the package that come with valves cover gasket and 4 spark plugs tube seals. Its around $10 - $20 and for replace it only ...

Question about Volvo S40

1 Answer

...a parts store and buy a valve cover gasket. remove valve cover, and old gasket. carefully clean all surfaces, install new gasket and do not over tighten the bolts when you put the valve cover back

Question about Volvo S40

2 Answers

...Install the valve cover on the cylinder head using a new gasket. Tighten the valve cover bolts to 14 ft. lbs. (20 Nm) in a crisscross pattern. Install the spark plug wires. Connect the negative ...

Not finding what you are looking for?
2001 Volvo S40 Logo

798 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2000 Volvo S40
2000 Volvo S40

682 Questions

2005 Volvo S40
2005 Volvo S40

335 Questions

2006 Volvo S40
2006 Volvo S40

175 Questions

2004 Volvo S40
2004 Volvo S40

161 Questions

2002 Volvo S40
2002 Volvo S40

131 Questions

Top Volvo Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Volvo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...