2002 Mercury Sable "p0316" Questions

What is code p0316 & p0302 on my ford sable P0302 IS MISFIRE ON# 2 CYLINDER P0316 I THINK IS KNOCK SENSOR BUT IM OLNY 90% ON THAT Numerous causes could of caused these codes: P0316 Computer ...

...is cutting off every time im going under 1000rpm. mercury sable 2002. codes were p0301 p0302 and p0316 until i changed crank sensor and spark plugs now it says p0316 p0305 p0306.. whats going on? ...

I'm getting codes, p0301 and p0316. I replaced the spark plugs and cylinder 1 spark plug was wet when i removed it. What could it be? I'm getting codes, p0301 and p0316. I replaced the ...

...I changed fuel filter,plugs, plug wires, coil, still idles rough.Autozone had three codes, P0316, P1151, P1131. What should I do next? P0316 crankshaft position sensor, camshaft position ...

...#1 - Replaced Ignition Coil #1 P0303 - Cylinder 3 Misfire Detected. Follow info from P0301. P0316 - Misfire Occurred In The First 1,000 Engine Revolutions. Causes: - Damaged CKP sensor. - ...

Check Engine Code P0316 My check engine light came on and then started flashing (which I had never seen). I had the engine code pulled and the only code was P0316. There was some jerking and it had ...

02 mercury sable P0301 and P0316 You have a miss in the number 1 cylinder during the first 300 revolutions and then during the next 1000 rpm it is still missing. Depending on the engine type you can ...

...is as follows. Engine mechanical fault, wiring, ignition/fuel system, injector, ECT/MAF sensor, ECM P0316 Misfire detected during startup-first 1000 revolutions- probable cause is as follows-Engine ...

Cold engine Misfire Engine misfires only on cold start-ups. The PCM sets trouble codes P0305 and P0316. After the engine warms up the misfire disappears and the engine runs great. The trouble codes ...

What do I need done if codes p0171 p0174 p0301 p0305 p0316 is it major problems OK,  We'll cover the Diagnostic Test Codes (DTCs), starting with the standard definition set by SAE J2012 ...