how replace sensor1 bank1 Honda odyssey 2010 disconnect the plug then use a 7/8" or equivalent metric wrench to un-screw the sensor from the exhaust. sometimes you have to heat the exhaust around the ...
...spacer and the block. Take off your oil filter, remove the oil filter stud with 1 3/16" socket( or metric equivalent) and the spacer will come off. I found all the auto parts stores around me said ...
Question about Cars & Trucks
...I need to remove spark plug on my Ryobi 2300 generator. I've tried 1/2 thru 13/16 and none fit. try metric sockets as spark plugs are metric measurement i cross referenced the spark plug (LD A7RTC) ...
...across a 1 1/4" socket that I purchased around the same time, but I realize that it should be the metric equivalent of this, so it probably did not fit perfectly. Metric conversion would be 31.75
...lose? What is used to get this loose to bleed the breaks? It's usually a 3/8 ths wrench or the metric equivalent. If you're very careful you can use a vice grip pliers to loosen
...an impact gun,transmission or floor jack,10 12 13 14 15 17 18 19 mm sockets,ratchet,wrench set metric, and 15 16 17 18 19 mm impact sockets,gasket removal tool,silicone brake cleaner and ...
...the outboard CV-joint from the hub using front hub remover tool T81P-1104-C or equivalent and metric adapter tools T83P-1104-BH, T86P-1104-Al and T81P-1104-A or equivalent. NOTE: Never use a ...
...able to move battery Most likely you missed the lower locking bar. Typically a 1/2, or equivalent Metric, bolt holding it in
...NEED TRANSMISSION JACK.YOU NEED TOOL BOX WITH 1/4 3/8 1/2 RATCHETS AND YOU NEED ALL STANDARD AND METRIC SOCKETS ALSO OPEN BOX END WRENCHES..IF YOU DONT HAVE ANY TOOLS BE CHEAPER TO GET A ...
341 questions posted
Usually answered in minutes!
578 Questions
521 Questions
449 Questions
472 Questions
460 Questions
