1990 Subaru Legacy "torque specs tie rod end" Questions

...tie rod end from the steering knuckle. now, turn the wheel all the way toward you and remove the outer shaft from the wheel. To remove the inner shaft you may need a pry bar. No auto parts store or ...

what is the torque specs for a tie rod end on a 1994 toyota camry front tie rod end torque specs The tie rod end adjusting nut, 54 ft lb or 74 Nm The tie rod end ball joint nut, 36 ft lb or 49 Nm

torque specs tie rod end dodge ram need torque specs on tie rod end Does this include the outer tie rod nut also to be 45lbs foot torque?

is the torque spec for outer tie rod end please? What is the torque spec for outer tie rod end on 2006 Honda CRV SE. 27 ft lbs https://www.instructables.com/Replacing-an-Outside-Tie-Rod-on-a-Honda-CRV

...can someone supply the torque values for the tie rod end / steering knuckle bolts? thanks 45 Ft-lbs Tie-rod balljoint stud-to-steering knuckle nut, and 55 Ft-lbs Tie-rod (outer)- to- inner jam lock ...

torque specs. Here are the tie rod end nut torque specs: • Lower Control Arms - (Front and Rear bolt) 129 ft-lbs x2 and (Knuckle Stud) 37 ft-lbs • Upper Control Arms - (Front and Rear bolt) 140 ft-lbs

...torque specs please Upper and lower ball joint torque specs, outer tie rods and wheel hub assembly also please. • Axle Shaft nut - 177 ft-lb • Hub and bearing assembly to steering knuckle bolts - 133 ...

torque specs. can you help CAMBER BOLT ON THE TIE ROD ENDS.YOU NEED A HAYNES REPAIR MANUAL TO GET THE TORQUE SPECS.YOU PROBABLY NEED WHEEL ALIGNMENT WHENEVER YOU REMOVE TIE ROD ENDS OR UPPER AND LOWER

What is the torque spec for the inner tie rods on my 2002 dodge dakota? Here is the inner tie rod end specs Tighten the inner tie rod to 100 N.m (74 lb ft).

...focus inner and outer tie rod end torque specs 59 ftlbs Hope this will answer your question,If do pls click on helful botton and you can follow me at fixya,so I can answer your question