...AC belt. I'm not having alot of luck. It looks simple but I can't figure out which tulley is the tension pully. Help!!!!!! It should have ann arm to it with a 3/8 ratchet indentation, or have an ...
AC does not. It makes a noise if turned on and gives the car the shakes and does not even pretend to blow cold air. The noise you hear is probably the belt slipping. Turn the A/C switch on and look at
...Pully My AC compressor pully is frozen, resulting in my belt breaking. Is there a way to bypass the pully or to they bake a bypass pully for this make/model? use a smaller belt use a pice of cord to ...
...ac comp sezd can you turn it by hand? While the belt is off, spin every pully. All pully's should spin freely except for the crank pully. If you have a locked up pully then you know what caused your ...
...do you bypass the ac unit on a 98 Chevy Blazer? Go to your local parts store. Ask them for a AC bypass pully. You will remove your AC pump and replace it with the pully and bracket. hope this
Question about Lexus ES 300
ac pully with a belt for a no ac engine Ac pump is pretty much shot so can you by pass the ac pully with a smaller belt for an 4.6l v8 with out ac? i purchased the AC delete belt...do i have to remove
AC pully is not spining fast enough. Can the pully be repaired without changing out the compressor. Even when the AC is turned off pully does not free spin. Intersting description, I do not understand
pully from the ac pump The 9/16 nut in the middle of the pully spins when I try to loosen it. How do I remove the pully from the unit? Try putting a 9/16 ratchet on it while u loosen it go to autozone
Question about Lexus ES 300
...How did they disable the ac if they didn't bypass the pully that is why the belt shredded. The compressor is probably locked up thefore unless the pully is bypassed the belts will continue to ...
Question about Lexus ES 300
...on ac changed both belts with napa didnt have a nosie but just in idler pully no noise til i turn ac o Would Japan belt do that I would think the AC pulley bearing may be the source wouldn't
403 questions posted
Usually answered in minutes!
363 Questions
302 Questions
281 Questions
228 Questions
185 Questions