...auto feature no flash on startup no #13 orange on dLc. so i could ground and read code from tccm. all fuses continuity tested. tccm goes all clickity clack on startup u can hear relay move 5-6 times ...
Question about Chevrolet Cars & Trucks
...transfer case. The NVG 246 EAU provides 5 modes, Auto 4WD, 4HI, 4LO, 2HI and Neutral. The Auto 4WD position allows the capability of an active transfer case, which provides the benefits of on-demand ...
...AUTO 4WD, 4WD HI, and 4WD LO modes. The front axle is unlocked or disengaged only during 2 HI or neutral modes. The NVG 236/246 transfer case features a 4 button shift control switch located on the ...
...transfer case, driver side but when that fails, your front hub stay's locked in the on position. Good luck and keep me posted and hope it's a simple fuse that has gone bad. You can pick up all these ...
Question about GMC Cars & Trucks
...transfer to the new switch. You can use your fuel pump in the tank, but may a pressure reducer device and a return line to carry excess fuel back to the tank. Dash? You can if you have similar parts ...
Transfer case relay 7*= NOT USED 8*=20A Auto Ride Control Switch/on off switch 9*=40A Auto Ride Control relay 10*=30A PCM power relay mini fuses 1=10A A/C relay 2=20A Aux power point 3= not used 4=15A
auto hubs are trying to engage. when i stop or put it in 4 wheel it stops. i do not have the push button i have shift lever for putting the truck into 4 hi and low. i just what to know if i can change
...transfer case. If it doesn't it is a front axle engagement problem. - If the front drive shaft does not turn : Shut of the truck ( still jacked up, and supported ) remove the vac lines from the IWE. ...
I Want ATS Diagram.(automatic Transfer Switch.) i want to make the (ATS) auto tarnsfer switch how plz sent the diagram of that if possible
1,584 questions posted
Usually answered in minutes!
1,041 Questions
758 Questions
811 Questions
722 Questions
687 Questions
